RW-100

Remote Control RW-100 is now compatible with all models of Dorrough analog and digital meters.

RW-100 Remote Control connects with up to four meters providing access to all meter functions.

Button legends on the top apply to analog meters and legends on the bottom apply to digital meters.


Connections to the meters are made through 8-pin mini DIN cables attached to the Alarm/Remote connector on the rear of the meters. The RW-100 is powered by the meter(s) to which it is connected, and contains a micro-controller to interrogate and serialize the switch status.

Alarm indicators for up to four meters can be monitored on the RW-100 front panel. In addition, the meter alarm closure feature is also duplicated on the rear panel.


Display Functions
The table lists the display functions.

Display Function
Description
Ref Mode
Expansion mode enabling reference adjustment around "0" to be within .1dB
Peak Hold
Indefinite Peak Hold
Peak Auto
3 second Peak Hold
Clock
Overs Reset
Full Scale
Overs Display
Phase
Displays phase error as a correlator 0 to 180 on full scale of meter
Sum/Diff
Sum / Diff display
Left/Right
Left/Right display

Alarm Functions
LED alarms on the far left of the unit indicate phase errors, bit stream corruption, overs, and loss of audio for each of 1 through 4 meters and are function selectable per the following table.
On
Off
Analog Meters
(Dip Switch #4)
Phase
Loss of Audio Full Scale
Digital Meters
(Dip Switch #4)
Phase BSC*
Overs BSC* Loss of Audio

* Bit Stream Corruption

 

Model RW-100 $250.00


The rear panel of RW-100.